Connection; Confi Guration; Language Settings; Time Settings - Hama 00053110 wlan inernet tuner modul Bedienungsanleitung

Info: Displays additional information about the
radio station or song
Sleep: Confi gures/activates the sleep timer
Alarm: Confi gures/activates the alarm function
Snooze: Mutes the alarm

3.3 Connection

Connect the Internet Tuner's power cable to a free mains
power socket.
Now decide how you would like to connect the Internet
Tuner to your sound system or loudspeaker system.
You can choose from the following options:
• Digital optical
First connect the TOSLINK cable to the Internet
Tuner's digital optical output. Then connect the other
end of the cable to the digital optical input on your
sound system or loudspeaker system.
• Digital coaxial
First connect the digital coaxial cable to the Internet
Tuner's digital coaxial output. Then connect the other
end of the cable to the digital coaxial input on your
sound system or loudspeaker system.
• 2x RCA
Use a standard RCA cable to connect the Internet
Tuner to your stereo system or sound system.
To operate the Wireless LAN Internet Tuner in a cabled
Ethernet network, connect an RJ-45 Ethernet cable to
the Internet Tuner's RJ-45 connection. Then connect this
cable to a router, switch, or network jack.
Then switch the Internet Tuner on using the on/off switch
on the rear panel of the device.
When switched on for the fi rst time, the Internet Tuner
displays the main menu in English as standard. We
recommend setting the device to your language as
described Point 4.1 as the next step.
14
4. Confi guration

4.1 Language settings

You are in the English main menu. To set the device to
your language, proceed as follows:
Use the cursor buttons on the remote control to navigate
through the main menu to the "System Settings" menu
item.
Then select your language from the "Language" submenu
by moving the cursor/bar to the desired language and
pressing the "Select" button on the remote control.

4.2 Time settings

In the "System Settings" menu, select the "Set Time/
Date" menu item.
Set Time/Date: You can set the date and time
manually. Select this menu item if you would like to
make these settings yourself. Go to the confi guration
menu by pressing Select on the remote control. In the
confi guration menu, set the time and date using the
cursor buttons and confi rm your entry by pressing
"Select".
Auto Update: The Internet Tuner can automatically
synchronize the time via the Internet. However, if you
activate this function, you must also set the correct
time zone for your location for the Internet Tuner to
synchronize the time correctly.
"Autom. Update" - "Update From Net"