Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

B 9e
7. Press the STANDBY to power off
NOTE:
1. If skipping occurs during CD play, try turning the volume down.
Do not open the CD DOOR when a CD is playing.
2. The unit will go to stand-by mode when put disc into or open state or play stop for 5
minutes in CD state .
Repeat the CD play
When the CD is playing, press the "repeat" Button once to repeat the track which is
playing, press the "repeat" Button twice to repeat the whole tracks, press the "repeat"
Button three times to cancel the repeat function
Program the CD tracks
When the CD track is in stop mode, press the "MEMORY" Button to program the tracks,
press "
Button" or "
Button" to select your desired track, then press "MEMORY" Button
for confirmation
We can program 20 CD tracks totally

USB operation

1.Press the STANDBY BUTTON to power on
2.Press the FUNCTION BUTTON switch to "USB "mode.
3.Insert a USB key inside the connector, the unit will display "USB READ".
4.After read out the total number of tracks, the unit will play the music from USB
automatically
5.Press the " Button", the USB will play the previous track, press the "  Button", the USB
will play the next track, press PLAY/PAUSE BUTTON for play and pause playing, press again
to resume.
6.Press the "VOL+" or "VOL-" to adjust the volume
7.Press the STANDBY to power off.
NOTE: The unit will go to stand-by mode when no USB or play stop for 5 minutes in USB
state.
The unit cannot read my USB device.
-Once you have plugged your device to the unit, you may need to switch on the USB
device before it can operate.
-This unit does not support a direct USB connection with a computer. You need to use a
USB device, or a MP3 player.
-If you are using a USB external hard disk: you need to connect your device
simultaneously to an external power source and to the unit. If you are using a self-
powered PMP, make sure that the battery is sufficiently loaded.
-Check that the files system of your USB device is formatted into the FAT or FAT 32 format.
USB device formatted into NTFS are not compatible with this unit. Caution: if you attempt
to modify your file system, formatting your device will erase all data. Please refer to your
USB device's instruction manual first.
44

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis