Troubleshooting; Specifications - Scansonic M7 Bedienungsanleitung

TROUBLESHOOTING

No sound Volume is set to minimum, increase volume.
Power is off.
Make sure the AC adaptor is plugged in and wall outlet is turned on.
Make sure audio device is connected by Bluetooth or cable.
When using Bluetooth, make sure no LINE-IN cable are plugged in.
Reset unit: Unplug AC adaptor, wait 60 seconds and plug it back in.
No response to The power LED indicator will flash when receiving signal from the remote control.
remote control (LED located behind speaker grill on front).
If LED does not flash:
Make sure no object blocks the signal.
Replace the remote control battery.
If LED does flash:
Reset unit: Unplug AC adaptor, wait 60 seconds and plug it back in.

SPECIFICATIONS

Power Source: DC 18V 3.0A AC Adaptor
Speaker: Subwoofer (x1)
Full range driver (x2)
Tweeter (x2)
Output power: 7W x2 + 22W
Weight: 5 kg
Dimensions: 388 x 246 x 123 mm (WxDxH)
Correct Disposal of this product. This marking indicates that this product should not be disposed with other household
wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste
disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device,
please use the return and collection systems or contact the retailer where the product was purchased.
They can take this product for environmental safe recycling.
6
4" 6 ohm
2.5" 4 ohm
1" 4 ohm