Intermec 700 Series Anleitung

Vorschau ausblenden Andere Handbücher für 700 Series:

Verfügbare Sprachen

Diese Anleitung herunterladen

700 Series

Multidock Instructions

Anleitung für Multidock

AD18

The multidock is normally mounted on a countertop or wall. Refer to the

Multidock Mounting Bracket Instructions (P/N 931-035-002) for installation

instructions.

Features of the multidock include:

•

Holds four mobile computers

•

Provides visual indication that your computers are connected to the

network (Link LEDs)

•

Provides the capability to connect your computers to a local area network

(LAN)

Mounting hole

Ethernet

connector

Link LEDs

Cabling Considerations

•

The multidock requires the universal power supply and appropriate power

cord (sold separately).

•

The multidock must be located within 1.8 m (6.0 ft) of an outlet.

•

The outlet must be grounded (three-prong).

Power jack

Mounting hole

Computer docking

connectors

Seite 2 • The outlet must have sufficient capacity to carry the load for the four docks and other electrical devices per circuit breaker or fuse. Note: If you are uploading/downloading data with the host computer, you will need to be located near a data jack. You also need communication cables for connecting the docks to the jack.
Seite 3 Befestigungsloch Stromanschluss Ethernet- Anschluss Computer- Andocksteckverbinder Verbindungs-LEDs Befestigungsloch Überlegungen Verkabelung • Das multidock benötigt einen Universal-Netzteil und ein geeignetes Netzkabel (separat verkauft). • Das multidock muss innerhalb true 1.8 m von einer Steckdose angebracht werden. Die Steckdosen müssen Schukosteckdosen sein und ausreichende Stromstärke •...