Operating Instructions; Intended Use; Unpacking And Control - Home electric SWM5002W Bedienungsanleitung

OPERATING INSTRUCTIONS

Intended use

• The device is intended only for the preparation of food. Any other use can lead to damages of the device or
injuries.

Unpacking and control

• Carefully take the device and its accessories out of the packaging. Retain the packaging in case you would
like to store the device away or transport it at a later date. If you choose to dispose of the packaging, then
please do so according to the applicable legal regulations.
• Check the packaging contents for completeness and damages. Should the contents in the packaging not be
complete or be damaged, do not use the device. Return it to your retail outlet immediately.
• Replace each of the hotplates once to check their correct fit.
Preparation
• Clean all hotplates (3, 10, 11, 12) with a damp cloth. Following wipe dry again.
• To remove production residues, operate the device without food for about 10 minutes. Please ensure
sufficient ventilation, as this may lead to slight smell and smoke, but this is normal and will disappear after a
short time.
• Following, clean the device as described in chapter CLEANING AND CARE.
Replacing the hotplates
• You can insert the hotplates according to your personal taste. Proceed as follows.
• Allow the device to cool off completely before replacing the hotplates.
• Slide the upper and lower lock release slider (1, 9) downwards or forwards in order to remove the hotplates.
You can now lift the hotplates out of the guidance and insert the desired one. Press down the hotplates and
ensure the snap closure locks into position.
• Attention: Always insert the hotplates only in pairs.
16