Problems And Troubleshooting; Statement Of Compliance; Smart Electronic Gmbh Industriestraße - SMART sliderX Bedienungsanleitung

If you own one of the smart receivers Zappix HD+, CX10 or VX10 and it is connected via HDMI
with your TV set, you can assign different functions to the navigation buttons ▲/▼/◄/►: Press
the key EPG (16), in order to use the navigation buttons ▲/▼/◄/► not anymore to scroll up,
down, left and right, but to move a cursor to each possible position. Press EPG once more, in
order to increase or decrease the screen image with the buttons ▲/▼. Press EPG once again,
in order to go back to the original function of the navigation buttons.

11 Problems and troubleshooting

The remote doesn't work:
After programming the sliderX for a certain unit, you can only operate this

unit, if you pressed just before the appropriate mode key. To be sure press
the right mode key once more!

Confirm with your original remote that the equipment works correctly.

If the listed code does not work, try the Code Search method or enter the next code of that
brand.

To find the corresponding code for your equipment use the manual search.

Check that the batteries have the correct polarity position.

The programming of the remote requires 2 AA batteries 1.5Volt (new).

If the red LED indicator is lit permanently, in general it will be necessary to replace the bat-
teries.
There are several device codes listed under the brand name of my device. How do I de-
termine the correct device code?

To determine the correct device code for your device, try each consecutive code until most
of the functions of the device function properly.
The devices only respond to a few remote control commands:

Continue testing further codes until the devices respond to the commands accordingly.

If manual code entry and automatic code search are unsuccessful, it may be that the device
is not compatible to your smart sliderX.

12 Statement of Compliance

Smart electronic GmbH, Industriestraße 29, 78112 St. Georgen, Germany, hereby states that
this product complies with the following directive and standards:

Electromagnetic Compatibility Directive 2004/108/EC

EN 55013:
2001 + A1: 2003 + A2: 2006

EN 55020:
2007
smart sliderX
Problems and troubleshooting
15