Operation - OTSTEIN OHDV6 Bedienungsanleitung

40000414English.fm Page 9 Friday, August 15, 2003 4:06 PM

Operation

1. Open the door and load the drum with
laundry. Ensure that garments do not
hinder closure of the door.
2. If drying delicate items press the
'CLASE TEJIDOS' button to reduce
the heat level. Press again on
completion, to select high temperature.
HIGH Heat setting
LOWLOW Heat setting
3. Turn Drying Time dial until the
required drying time aligns with the
symbol ●.
The PLANCHADO RÁPIDO setting
shown by the symbol
Drying Time dial provides a
conditioning and anti-crease function.
The dryer will heat the load for 8
minutes followed by a 2 minute cool
down period and is especially good for
garments which may have been left for
some time prior to ironing, in a linen
basket for example. Garments may also
become stiffened when dried outside
on a washing line or inside on
radiators. The PLANCHADO
RÁPIDO process relaxes the creases in
the fabric making ironing quicker and
easier.
4. Gently close the door pushing it slowly
until you hear the door 'click' shut.
5. Press the 'ON' button. The indicator
will light and the drying cycle begins.
6. The load is dried by tumbling in
thermostatically controlled warm air.
Cool air is used for the last 10 minutes
to reduce creasing and cool the load
ready for handling.
7. When the program is fully completed
the drum will stop rotating and the dial
will point to the symbol ●.
Open the door and remove the load.
THE DRUM, DOOR AND LOAD
8. Clean the filter after every drying cycle
on the
to ensure maximum dryer efficiency.
(See 'Filter' section.)
ENGLISH
WARNING!
MAY BE VERY HOT.
9