Dvd Mode - AEG CTV 4807 Bedienungsanleitung, Garantie

Operation

DVD mode

Films or music CDs can be played in DVD mode.
To switch to DVD mode, press the "TV/DVD/AV" button until
the DVD standard image and "DVD" are displayed on the
screen.
Inserting a disc
Press the "OPEN/CLOSE" button.
The disc drawer opens.
Insert the disc into the drawer with the printed side pointing
up.
Press the "OPEN/CLOSE" button again.
The disc drawer closes and the disc's master menu is loaded.
Playback
To start playback, press the " / " button.
To interrupt playback, press the " / " button again.
A freeze-frame is displayed on the screen.
To continue playback, press the " / " button again.
To end playback, press the " " button.
The DVD standard image is displayed on the screen.
To continue playback at the same point, press the " / "
button.
To end playback entirely, press the " " button a second time.
MP3 disc playback
Once you have inserted an MP3 disc into the television set, the
files or folders on the disc are displayed.
To display a folder's MP3 tracks, select the folder with the
" ", " ", " " and " " cursor buttons.
Press the "PROG" button.
A list of the MP3 tracks in the selected folder is displayed.
Use the " ", " ", " " and " " cursor buttons to select the
desired track.
Press the " / " button.
Playback starts.
32
Picture CD playback
Once you have inserted a disc containing pictures into the
television set, the files or folders on the disc are displayed.
To display a folder's pictures, select the folder with the " ",
" ", " " and " " cursor buttons.
Press the "PROG" button.
A list of the pictures in the folder and a preview of the selected
picture are displayed on the screen.
Select the desired picture with the " ", " ", " " and " "
cursor buttons.
Press the " / " button.
A slide show is started with the selected picture. The next picture
is displayed after five seconds.
To stop the slide show, press the " / " button.
To continue the slide show, press the " / " button again.
To rotate or mirror the picture which is displayed, press the
" ", " ", " " and " " cursor buttons.
To reduce or enlarge the picture which is displayed, proceed as
follows:
Press the "ZOOM" button.
To reduce the picture, then press the " " button.
To enlarge the picture, then press the " " button.
If no button is pressed for five seconds, the next picture is
displayed.
To end the slide show and display the picture files on the
disc, press the "DIGEST" button.
Carrying out special settings
Special settings can be carried out for each DVD if the DVD
offers the corresponding option.
If you call up a function which is not supported by the
inserted DVD, " " is displayed on the screen.
To set the picture standard, repeatedly press the "SYS."
button.
You may choose between PAL, NTSC or AUTO. If you
select AUTO, the picture standard is set automatically.
If this leads to picture interference, select the PAL or
NTSC picture standard.
To change the sound output, repeatedly press the "L/R"
button.
You may choose between playback of the left channel, the right
channel and both channels (stereo sound).
To select a different sound output language, repeatedly press
the "AUDIO" button.
To select a different subtitle language, repeatedly press the
"SUBTITLE" button.