Change Wireless Channel - Atlantis Land ESurf A04-M313AD Handbuch

4. Change wireless channel

In case of unactive wireless connection or any interferences, is possible to change
wireless channel between mouse and receiver.
Follow procedure as below:
Press the ID button on the bottom of mouse, the LED light starts blinking.
Press the ID button on the top of the receiver and LED light will start
blinking.
The ID link is now connected.
When the receiver holder opens, the mouse LED will light up.
The mouse LED will only shut off when the receiver is put back
to the receiver holder, and the receiver holder is closed.
The mouse automatically switches on when the receiver is
removed from the compartment and switches off when it is
placed back on the holder, and the compartment is closed.
The ID link is pre-set and memorized in the receiver. Do not
make the ID link unless the wireless connection is somehow
missed.
If the mouse still doesn't work after the process above, please
wait for 15 seconds and then repeat procedure.
ENGLISH
18