Werbung
-
Encoder 5: Track select
-
Encoder 6: Crossfader assign
-
Encoder 7: Track Pan
-
Encoder 8: Track Volume
RAC
(Gruppe 6) Racksteuerung der Macros 1 bis 8
-
Encoder 1: Macro 1
-
Encoder 2: Macro 2
-
Encoder 3: Macro 3
-
Encoder 4: Macro 4
-
Encoder 5: Macro 5
-
Encoder 6: Macro 6
-
Encoder 7: Macro 7
-
Encoder 8: Macro 8
Pan
(Gruppe 7) steuert Panorama für 8 Tracks
GLob
(Gruppe 8) Global controls
-
Encoder 1: Tempo coarse, Push button 1: Nudge down
-
Encoder 2: Tempo fine, Push button 2: Nudge up
-
Encoder 3: Quantization, push button 3: Stop scene
-
Encoder 4: Scene select, push button 4: Start scene
-
Encoder 5: Track select, push button 5: Global play
-
Encoder 6: Cue volume, push button 6: Global stop
-
Encoder 7: Master pan, push button 7: Global record
-
Encoder 8: Master volume, push button 8: View arrangement/session
Fader/Tasten Gruppen:
Fader steuern 8 Track-Volumes in allen 8 Gruppen (gleiche Funktion in jeder Gruppe).
Tasten:
Gruppe 1 - Launch Clips (LED blinkt = Clip läuft, LED an = Clip geladen, LED aus = kein Clip)
Gruppe 2 - Stop Clips (LED an = Clip gestoppt)
Gruppe 3 - Tracks active (LED an = ativer Track)
Gruppe 4 - Tracks solo (LED an = Track in Solo)
Gruppe 5 - Tracks arm (LED an = Record arm aktiv)
Gruppe 6 - Tracks monitor (LED an = Monitor In oder Auto)
Gruppe 7 - Track control (die 8 Tasten steuern folgende Funktionen im selektierten Track:
1=launch, 2=stop, 3=active, 4=solo, 5=arm, 6=monitor, 7=device view, 8=clip view)
Gruppe 8 - Tracks select (LED an = Track ist selektiert)
Werbung
