Werbung
Mount both M3x16 screws using washers and secure
them with stopnuts and washers.
At older plastic cages you may drill according holes to
the cage.
The servo is secured with two additional zipties.
3. Montage der Ösenschrauben / Mounting the eyebolts:
Anleitung / Manual Hacker Para RC „Beschleuniger-Set"
© 2014 Hacker Motor GmbH
Montieren Sie die beiden Ösenschrauben links und
rechts am Alubügel. Verwenden Sie dazu
Schraubensicherungslack.
Mount the eyebolts at the left and right side of the
aluminum bracket. Use thread lock for securing the
bolts.
Seite / page 3
Werbung
