Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Do not operate any appliance with a damaged cord, once the appliance
malfunctions, or has been dropped or damaged in any manner. Special tools are
required to repair the appliance. Ask a (*)competent qualified electrician to check
and repair it.
From time to time check the cord for damages. Never use the appliance if cord or
appliance shows any signs of damage as it could be dangerous.
Should the cord be damaged, it must be replaced by a competent qualified
electrician(*)in order to avoid any risk. Before cleaning, always unplug the
appliance from the power supply. All repairs should be made by a competent qualified
electrician(*).
(*) Competent qualified electrician: after sales department of the producer or importer or
other person who is qualified, approved and competent to perform this kind of repairs in order
to avoid all danger. In any case you should return the appliance to this electrician.
S
c
o
p
e
o
f
d
e
l
i
v
e
S
c
o
p
e
o
f
d
e
l
i
v
e
stand (2 parts) for assembly
screws for assembly
tower fan
instruction manual
A
s
s
e
m
b
l
y
A
s
s
e
m
b
l
y
Unpack all parts and remove protecting foils. You need a screw driver to assemble the
appliance. Assemble the appliance as follows:
1) Put the tower ventilator to the floor and attach the part of the stand (which provides a
cable outlet) to the bottom of the motor housing. Pull the cable through the slot.
2) Now attach the second part of the stand to the first part. Tighten the two stand parts by the
screws (for stand) provided.
3) Fix the two collars that are fixed at the cord to the bars (collar bar 1 and collar bar 2 see
figure)
4) Unscrew the cord protecting bar at the stand and remove.
5) Now you can put the cable into the slot.
6) Fix the cord protecting bar again by tightening the two screws provided.
r
y
r
y
9
Werbung
Kapitel
Inhaltsverzeichnis
