sentlotec TH6-VR Montageanleitung Seite 3

Instructions for installation
2. ENGLISH
2.1. Installation of the stainless steel tube
Please take the following points into accont, befor you are piling the stones.
2.2. Preparing the sauna heater
1. Make sure that the sauna heater has completely cooled down.
2.3. Installation of the stainless steel tube
1. Place one or two layers of sauna stones between the heating elements
to align and fi x them.
2. Make sure that the heating elements do NOT touch each other.
3. Put the tube over the center heating elements, so that it stands safe.
4. Check again that the heating elements do NOT touch each other.
5. Piling the stones should be done with care. The stones should be
placed so that the gap between the tube and the frame of the heater
is completely fi lled with stones for the whole height of the heater. The
stones should not be placed too tightly together; instead there should be
enough space between the stones to allow air to fl ow.
6. Also cover the tube with sauna stones.
TH-6
WORLD OF WELLNESS
TH-9
p. 3/4
TH-12
EN