Specifications; System Requirements - Ultron Ucr 75-In1 Handbuch

Card Reader intern

Specifications:

- USB 2.0 multi-format card reader
- Downward compatible with USB 1.1
- Supports all common memory card types (CF / XD / XD H Type / XD M TYPE / CFI / CF II / Ultra II CF / Extreme CF / Extreme III CF / MD / SD
/ SDHC / Micro SD / Micro SDHC / T-Flash/ Extreme SD / Extreme III SD / Ultra II SD / MMC I / MMC II / MMC 4.0 / Ultra MMC / MS / MS
Pro / MS-Duo / MS Pro Duo / Extreme MS Pro / Extreme III MS Pro / HS MS-MG Pro Duo / MS-MagicGate / MS-MG-Pro / MS-MG-Duo / MS-MG
Pro-Duo / MS-ROM / HS MS / MG Pro / Ultra II MS, with adapter: Mini SD / MMC Micro / RS-MMC / HS RS MMC / M 2)
- External USB 2.0 access
Scope of Delivery:
- UCR 75-in-1 Card Reader
- Manual

System Requirements:

- Intel Pentium or compatible computer
- 1 free USB port on the motherboard
- 1 free 3.5" bay
- Windows 2000 (SP4+), XP 32/64-bit (SP1+), Vista 32/64-bit, Windows 7 32/64-bit, Mac OS X, Linux (Kernel 2.4.1+)
Hardware Installation:
- Please remove both side panels from the case
- Remove a 3.5" panel from the front panel
- Carefully put the card reader into the 3.5" bay until it is flush with the front of the case
- Now screw the card reader tight on both sides.
- Connect the cables for the card reader to your motherboard. Please refer to the manual of your motherboard to find out where the plug is
to be connected.
The manual for your case tells you how to remove the side panels and the 3.5" front panel.
UCR 75-in1
3 Jahre Herstellergarantie
3 years manufacturers warranty
3 ans de garantie du fabricant