Hettich LegaDrive Touch Comfort Montageanleitung Seite 6

GB
Display LegaDrive Touch
Upward desk top movement
1
Downward desk top movement
2
3 Memorising a desk top position
4
Pedestal stop and shelf stop positions
5
Plug detection
6
Auto Detect Number of Drives
7
Changing desk height unit (cm or inch)
1 Upward desk top movement
The function provides an easy way of adjusting the desk top to a higher
position. To do this, proceed as follows:
Press the desk top up button and keep it pressed until the desk
top reaches the height you want.
Downward desk top movement
2
The function provides an easy way of adjusting the desk top to a lower
position. To do this, proceed as follows:
Press the desk top down button and keep it pressed until the
desk top reaches the height you want.
3
Memorising a desk top position
This function memorises a defined desk top height (one desk top height can
be memorised per memory position button). To memorise a desk top
position, proceed as follows:
Move the desk top to the desk top position you want.
The display shows this position (e.g. 73cm).
SAVE
Press the save button.
The display shows S –.
2
Press the chosen memory position button (e.g. 2).
The display shows S 2.
The desk top position setting will now be memorised on the
memory position button selected. You will hear the control
unit click twice and the memorised desk top position will be
displayed after approx. 2 seconds.
6
Display is locked
(key symbol)
www.hettich.com
Activating and deactivating by swiping to the left or right.
8
Manual reset
9 Returning control unit to factory settings (S0 menu)
4
Pedestal stop and shelf stop positions
Note
These steps must be performed separately for a
pedestal stop position and a shelf stop position.
These two features can be used to limit the desk's travelling range (e.g.
where a pedestal is standing under the desk). A pedestal stop position can be
set in the lower half of the travelling range, a shelf stop position in the
upper half. If a pedestal stop position is set, this is used as the new end
position; a shelf stop position functions as a new upper end position for the
travelling range.
To memorise a pedestal stop / shelf stop position, proceed as follows:
1.
Move the desk top to the position you wish to use as the new
pedestal stop / shelf stop position.
or
To do this, press the desk position down or desk position up
buttons until the chosen position is reached.
2.
Simultaneously press the desk position up and desk position
down buttons and keep both buttons pressed for approx.
and
10 seconds. The control unit clicks twice once the position
has been memorised.
To deactivate a pedestal stop / shelf stop position, proceed as follows:
Move the desk top to any position in the lower half of the
1.
travelling range to deactivate the pedestal stop or to any
position in the upper half of the travelling range to
or
deactivate the shelf stop. To do this, use the desk position
down or desk position up buttons until the chosen position
is reached.
Simultaneously press the desk position up and desk position
2.
down buttons and keep both buttons pressed for approx. 10
and
seconds. The control unit clicks once when the position has
been deactivated.