Fidata HFAS1-XS20U Kurzanleitung Seite 7

Do not install this unit in a place where there
are large temperature changes.
Condensation could occur.
When the unit does not work properly, please
leave it for a while with the power switched off.
Do not put this unit in an area where the wires
go through a place that people pass through.
If someone trips on a wire it could cause an injury.
Do not do the following as they could prevent
heat from dissipating.
• Do not cover this unit with a cloth or tablecloth.
• Do not install this unit directly on top of a rug or carpet.
• Do not install this unit in a narrow space that is not airy.
Otherwise, heat could build up and cause a failure.
3.4. CAUTION on Power and Power cord
Use the supplied power cord.
Using a cord other than the supplied one could
cause smoke or a fire.
Use a power supply with a voltage of 100 V –
240 V.
If you use a power supply with a voltage outside
that range, it could cause a build-up of heat, fire
or electric shock.
CAUTION
Ensure that you can see the power plug and
can reach the electrical socket.
In the unlikely event of a problem, you will then
be able to easily pull out the power plug.
NOTICE
Do not install this unit in places that are
extremely hot or extremely cold (places
outside the range of 5°C to 35°C).
Otherwise, the temperature could have an
adverse effect on the internal components and
cause a failure.
WARNING
Do not do anything that could damage the
power cord.
• Do not put this unit under something or place a
heavy object on it.
• Do not damage or process this unit.
• Do not forcibly bend, twist, or pull this unit.
• Do not put this unit close to heating equipment
or heat it.
If the core wire (part where the electricity flows) is
exposed or broken, it could cause a fire or electric shock.
3.For Safe Use
6