Configuration; Configuration By Using A Ini-File; Configuration By Using An Additional Function Of „Ctpikocard.dll - Pikosys Pikoeval Handbuch

Company Card Simulation DLL
5.3

Configuration

There are 2 possibilities to configure the card type.
Note:
The change of the index during operation is equal to the remove and insertion of a
card in the card reader.

5.3.1 Configuration by using a INI-File

The Company Card Simulation can be configured by a „ctpikocard.ini" file.
The configuration of the card type can be changed by using this file.
The following card types can be set:
- Company Card (locked in tachograph)
- Company Card (not locked in tachograph) but data available
- Company Card (not locked in tachograph) no data available
- Company Card expired (older than 5 years)
- No card inserted in card reader
Please change the value of the "index" (manually or by program) to change the card
type by using the „ctpikocard.ini".
Structure of the file „ctpikocard.ini":
[CardSlot]
Index=x
x=1 : Company Card (locked in tachograph)
x=2 : Company Card (not locked in tachograph) but data available
x=3 : Company Card (not locked in tachograph) no data available
x=4 : Company Card expired (older than 5 years)
x=5 : No card inserted in card reader
5.3.2 Configuration by using an additional function of „ctpikocard.dll"
The Company Card Simulation can be configured by using the additional function
„test_select".
Handbuch / Developer Manual PikoEval
Version 11
Seite / Page 150 / 160