Introduction; Safety Instructions - Omnitronic AD-500 Bedienungsanleitung

Antenna Distributor Set
For your own safety, please read this user manual carefully before you initially start-up.
Every person involved with the installation, operation and maintenance of this device has to
- be qualified
- follow the instructions of this manual
- consider this manual to be part of the total product
- keep this manual for the entire service life of the product
- pass this manual on to every further owner or user of the product
- download the latest version of the user manual from the Internet

1. INTRODUCTION

Thank you for having chosen the OMNITRONIC antenna distributor set AD-500. If you follow the
instructions given in this manual, we are sure that you will enjoy this device for a long period of time.
Unpack the device.

2. SAFETY INSTRUCTIONS

This device has left our premises in absolutely perfect condition. In order to maintain this condition and to
ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning
notes written in this user manual.
Important:
Damages caused by the disregard of this user manual are not subject to warranty. The dealer will
not accept liability for any resulting defects or problems.
Please make sure that there are no obvious transport damages. Should you notice any damages on the
power unit or on the casing, do not take the device into operation and immediately consult your local dealer.
This device falls under protection-class III. The device must be operated with an appropriate power unit.
Always plug in the power unit least. Make sure that the device is switched off before it is connected to the
mains.
USER MANUAL
AD-500
CAUTION!
Keep this device away from rain and moisture!
Unplug mains lead before opening the housing!
11/16 00070856.DOC, Version 1.0