Chapter Iii: Battery Charging; Chapter Iv: Bluetooth Connection - SOUND2GO cuby Bedienungsanleitung

Chapter III: Battery charging

The first 3 times, please recharge for 10 hours; after that a recharge
of 6 hours is enough.
If the speaker will not be used for five minutes, it will enter into energy
saving mode, the indicator light at the top will turn off. When a Micro-
SD card is inserted, an AUX cable is connected or any key is pressed,
it will leave the energy saving mode.
DC 5V

Chapter IV: Bluetooth Connection

When you turn on the speaker, the Bluetooth pairing/connecting
function is active. If you don't pair or connect a Bluetooth device in the
first five minutes, the speaker will enter energy saving mode.
Pairing Bluetooth device
● This speaker's Bluetooth device name is s2g Cuby
● The pairing code is 0000
Remark: if the Bluetooth standard of your device is 3.0, you don't
need to enter the pairing code.
If your Bluetooth device had been paired with the speaker successful-
ly before, it will connect with the speaker automatically
Music Control with the keys
You can control the sound source via speaker. When a Bluetooth
device is connected, the speaker can control your cell's music file or
playing situation: next/previous song, pause/play and volume control.