Werbung
Verfügbare Sprachen
Verfügbare Sprachen
C. Buttons Function
1. High sensitivity Mic.
2. Volume Down
3. Volume Up
4. Charging indicator (RED LED)
5. Bluetooth indicator (BLUE LED)
6. Bluetooth indicator (RED LED
7. Charging port
8. MFB (Multi-Function Button)
9. Speaker
D. Power On / O
Power On :
Press MFB (8) button for 3 seconds, EAZY say "Ready" and Bluetooth
indicator (5) blue led fl ashing.
Power O :
Press MFB (8) button for 3 seconds, EAZY say "Power O " and
Bluetooth indicator (6) turns red.
E. Pairing EAZY with Bluetooth Mobile Phones
I. Pairing procedure for 1st phone
1. Ensure the EAZY in power o mode.
2. Press and hold the MFB (8) for 5 seconds until EAZY say "Ready and
"Pairing Now". 2 Bluetooth indicators (5) & (6) turn blinking red / blue.
3. Access your mobile phone's Bluetooth menu in search for Bluetooth
device. Select "EAZY" . And if the phone asks for the passcode ,
please enter "0000" then press OK. Now EAZY announces "pairing
success" and "phone connected". Pairing procedure is completed.
EAZY is ready for use now.
8
II : Pairing with 2nd phone simultaneously (Multi-point)
Multi-point pairing procedures :
Step 1 :
After you paired the 1st phone as above-said pairing procedure, turn o EAZY.
Now the phone gets disconnected.
Step 2 : Follow the above-said pairing procedure (2) & (3).
Now, 2nd phone get paired. Then re-activate phone bluetooth connect to
re-connect with 1st phone
Remarks :
If no pairing within 15 minutes at pairing mode, EAZY will power o .
Repeat pairing step 1-3 to pair EAZY again.
F. Operation
Answer a call:
When incoming call in, bluetooth indicator (5) & (6) turns blinking
alternatively, press MFB (8) once to answer a call.
Reject a call:
During ringing, press and hold the MFB (8) for 3 seconds to reject incoming
call.
End a call:
During talking, press once the MFB (8) button to end a call. EAZY
announces "Hang-up".
Last number Redial: (available for 1st primary phone)
Double press the MFB (8) to make last number redial, EAZY says
"Redial".
9
Werbung
