Park Position - Travel Vision R6 Flat Benutzerhandbuch

Press Enter and the display will show the current installed software version number. Press Enter again,
and the following message will be displayed:
Press Enter again
Press Enter again, and the system will be updated with the new software and will automatically reboot.
Remove the USB flash drive from the USB port. The system has now been updated with the new
software and is ready for use.
5.1

Park position

When storing the system, you should set it in the park position. In the park position the dish is rotated so
that the system is best suitable for storage.
Press on the blue park button (2) and you will see these messages:
Put the Bracket in P position and press Start
SETTINGS:
FIRMWARE
Firmware :
REV 1.*.**
Firmware update
Are you sure?
UPDATE
*******
TRAVELVISION
Recreation
DISH IN POS. P
AND PRESS START
CAUTION PARKING
IN ... SEC
SYSTEM
PARKED
MODULE CAN BE
REMOVED
Page 14