Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
USING INSTRUCTION
Place Polair in a stable area. Plug the
product into a 230V-240V~A.C. electrical
outlet.
1 ON/OFF: Press ON/OFF button for start
the product. Polair goes on automatically
in normal speed and displays the room
temperature. Press a second time to switch
off the product.
2
SPEED: To choose the 3 ventilating
speeds
in
medium_strong_low
The led light turns on according to your
choice. (show on the digital display
.
c
d e
)
3 OSC: Press the button to start and stop
the oscillation (show on the digital display
.
f
)
4
MODE: Press the button to choose
the 2 ventilation modes. Press one time
for NATURAL WIND MODE and a second
time for NIGHT MODE. Press a third time to
disable and being in normal mode.
•
NATURAL WIND : This function creates a
breeze like a natural wind. It alternates
different ventilation cycles. When the
mode are turns on you can choose the
intensity in changing the speeds:
LOW BREEZE For an alternating of
◦
75 sec ventilating cycles principally in a
low speed (show on the digital display
.
+
)
b
c
MEDIUM
◦
alternating
cycles
principally
speed (show on the digital display
.
b
d
+
)
STRONG
◦
alternating
cycles
principally
speed (show on the digital display
.
b
e
+
)
NUIT : The LEDs of the digital display turn
off and the speed ventilation decrease
progressively according to the start speed.
Such as:
10
BREEZE
For
of
75
sec
ventilating
in
a
medium
BREEZE
For
of
75
sec
ventilating
in
a
order.
5 TIMER: The product is equipped with a
timer. You can program his stop from 1 hour to
8 hours. Press several times the botton until the
time appeared. (show on the digital display
.
)
h
6 COOL: For activating the cool mode
press the button. Press a second time to turn
off this function. This function works only if the
water level is enough. If the captor detect
a lack water during 15 sec the cool mode
turn off and a warning signal turn on during
10 sec. The cool function works with the
others modes.(show on the digital display
.
)
g
5 DRY FUNCTION : Press the timer button
during 3 secs for turn on the drying principal
filter mode. This drying works in strong speed
an
during 20 min and stops. During this mode
only the ON/OFF button works.
REMOTE CONTROL
an
The remote control included a button cell
strong
battery (type CR2032 /3 V).
All the functions performed with the remote
control. This remote control works like the
control display.
◦
With a strong departure speed
the
product
speed during a half hour then
in medium speed during a half
hour and still works in low speed
(show
on
the
.
a
+
)
c
◦
With a medium departure speed
the product works in medium
speed during a half hour and
then still works in low speed
(show
on
the
.
a
+
)
d
◦
With a low departure speed the
product still works in low speed
(show
on
the
.
a
e
+
)
works
in
strong
digital
display
digital
display
digital
display
Werbung
Inhaltsverzeichnis
