Renkforce 1296313 Bedienungsanleitung Seite 3

G Operating instructions
Surge protected 6 socket
power strip
Item no. 1296313
Intended use
Use this power strip to turn on/off connected devices using the built-in ON/OFF main
switch. The surge protection indicator lamp lights up to show that all connected de-
vices are protected against electrical power surges. The total power consumption of
all connected devices may not exceed 3680 W. The product may be used in dry, closed
indoor spaces only.
For safety and approval purposes (CE), you must not rebuild and/or modify this pro-
duct. If you use the product for purposes other than those described above, the pro-
duct may be damaged. In addition, improper use can cause hazards such as short cir-
cuiting, fire, electric shock etc. Read the instructions carefully and keep them. Make
this product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All
company names and product names are trademarks of their respective owners. All
rights reserved.
Delivery content
• Power strip
• Operating instructions
Safety instructions
R ead the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the war-
ranty/guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may be-
come dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong
jolts, high humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of opera-
tion and protect it from any accidental use. Safe operation can no longer
be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a
low height can damage the product.
• Also observe the safety and operating instructions of any other devices
which are connected to the product.
• The power strip is equipped with a child safety device. The device will
only release the socket openings, if both pins of a plug are inserted into
the socket simultaneously. Still exercise caution when using the product
in the vicinity of children. Children cannot recognize the hazards posed by
improperly using electrical devices. This poses a risk of fatal injury due to
electric shock!
• Only use a properly installed mains outlet of the public power supply
(230 V/AC, 50 Hz) as a power source.
• The mains outlet must be located near to the device and be easily acces-
sible.
• Unwrap the power cable fully during use. The power cable may not be
squashed or damaged on sharp edges. Do not place any objects on the
cable and do not step on the cable. Lay the cable so that no one can acci-
dentally trip over it and so that the plug is easily accessible. Do not lay the
cable under rugs, etc.
• Never touch, use, plug in or unplug the product with moist or wet hands.
This poses a risk of fatal injury due to electric shock!
• Never connect the product to the mains directly after moving it from a cold
to a warm room (i.e. during transportation). This may cause condensation,
which can destroy the device or lead to electric shock. Let the product
first reach room temperature. Wait until all condensation has evaporated
– this may take up to several hours. Only now may the product be connec-
ted to the power supply and operated.
• Only unplug a power plug by pulling on the provided grips, never pull on
the power cable to unplug the device.
• Do not overload the power strip. Heed the power rating in the chapter
"Technical data".
• Do not connect the product in series! This may overload the power strip.
This poses a fire hazard! Connect the power strip's safety plug directly to
a mains outlet. Do not connect any more power strips to the product.
• Do not operate the power strip covered! The higher the connected load,
the more the power strip and power cable will warm up, which can cause
overheating and possibly a fire if the product is covered.
• The power strip is voltage-free only once it is unplugged.
• Unplug the product under the following conditions:
- before cleaning the product
- in case of a storm
- for extended periods of disuse.
• Never pour liquids above or near the product. This poses a great risk of
fire or fatal injury due to electric shock. Should any liquid enter the device
interior, turn off the mains outlet to which the power strip is connected en-
tirely (fuse/automatic circuit breaker/residual current-operated device).
Now unplug the power strip and contact a professional. Discontinue use
of the product.
• In industrial facilities, heed all applicable accident prevention regulations
for electrical installations and equipment.
• The use of electrical devices must be supervised by trained staff in
schools, training centers, hobby and do-it-yourself workshops.
• Consult an expert when in doubt about operation, safety or connection of
the device.
• Maintenance, modifications and repairs are to be performed exclusively
by an expert or at a qualified shop.
• If you have questions which remain unanswered by these operating inst-
ructions, contact our technical support service or other technical person-
nel.
Installation
Do not bend or squash power cables. Doing so may cause malfunction,
short-circuit or damage to the product. Make sure not to damage any
cables or power wiring when drilling holes in the wall or screw mounting to
predrilled holes.
When choosing a mounting site, note that the plug strip may only be moun-
ted on a smooth, inflammable, and dry surface.
On both ends of the plug strip there are openings appropriate for mounting the unit.
Mount the power strip using suitable fastening material to a secure and even surface
(i.e. a wall) as needed.
Operation
Make sure that the power strip is voltage-free before connecting devices.
• Plug the power strip plug to your mains outlet.
• Plug in up to six devices to the power strip outlets.
• Now turn on the power strip by pushing the ON/OFF main switch. When the device
is on, the red power indicator in the ON/OFF main switch lights up.
• The surge protection indicator lamp lights up to show that surge protection is active.
If the indicator lamp is not lit, surge protection is not active.