Werbung
Verfügbare Sprachen
Verfügbare Sprachen
For a better longevity and performance of your Fleximaster gun,
®
please only use genuine Cassese
flexible and hard points.
OPERATION
WARNING
Wear safety
LOADING POINTS WARNING
B
glasses when
(See figure 1 )
using this tool
C
1. Pull the FOLLOWER KNOB (A) up
and rotate to the locked position.
2. Insert a stack of Cassese Hardpoints
or Flexipoints (B) (176 points per stack)
in the MAGAZINE (C) and release the
FOLLOWER KNOB (A) so it will apply
C
D
pressure to the points.
3. Reload a stack of points when the
FOLLOWER KNOB (A) reaches the
reload position.
A
E
Figure 1
USING THE FLEXIMASTER
1. Back up the wood frame with a solid object to absorb the shock and ensure
maximum penetration. Place the FlexiMaster on the backing and hold it tight
against the wood as you pull the trigger.
2. After inserting enough points to hold the glass, artwork, mat and
backing, turn the frame right side up for inspection.
3. If it is necessary to clean the glass again, bend the Flexi-Points up, remove the
glass, clean and replace it. Then bend the points back down (this operation is not
possible with hard points)
4. The depth of penetration of the point can be adjusted by turning the ADJUSTABLE
KNOB (D). Clockwise increases depth, counterclockwise decreases
depth.
CAUTION
: Do not operate the FlexiMaster while pointed at any object other
than the frame. Points can inflict injury.
2
Werbung
