Charging The Li-Ion Battery; Attaching The Battery - Cotech TD8503T-UK Bedienungsanleitung

Charging the Li-ion battery

The Li-ion has no memory, so it can be recharged whenever you like without
risk of damage. You do not need to wait until the battery is fully discharged
before recharging it.
1. Connect the charger to a 230 V mains outlet. The green LED will come on.
2. Connect the charger cable to the charging socket.
3. Remove the battery from the multi-tool by pressing in both snap lock catches (4)
and pull the battery straight out.
4. Insert the battery into the charging socket. The red LED on the charger will come
on during charging and change to green when the battery is fully charged.
N.B. The battery will only fit into the charger one way, do not force it.

Attaching the battery

Replace the battery. Push it all the way until the catches snap shut.
N.B. The battery will only fit into the charger one way, do not force it.
Use
Sandpaper
1. Attach the sandpaper holder (8) making
sure that the holes line up with the four
pins on the multi-tool attachment.
2. Insert the screw (6) and tighten it with
the Allen key (11), but not too tight.
3. Select an appropriate grade of
sandpaper for the work to be done.
4. Press the sandpaper firmly onto
the holder.
11
9
6
8