Herunterladen Inhalt Inhalt Diese Seite drucken

Grundig CG 5040 Bedienungsanleitung Seite 16

Contact grill
Vorschau ausblenden Andere Handbücher für CG 5040:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
OPERATION _______________________________
The height of the upper grill plate can be
adjusted as follows:
Release the transport lock
1
and open the grill halfway.
Push the handle of the height adjustment
2
mechanism
to the left or right in order to
M
determine the height.
0 indicates the lowest
position. The plates touch
each other.
4 indicates the highest
position.
Table grill position
In this position, the grill can be folded out and
thus offers two large grilling areas. This position
is suitable for preparing sausages, steaks, fish,
vegetables and fruit.
Release the transport lock
1
Pull the handle
about ¾ of the way up
2
P
and hold it in this position. Make sure that the
arrestor for the upper grill plate
locked position.
Push the unlocking hinge
3
the arrow and guide the upper half of the grill
downwards.
16
ENGLISH
on both sides
K
on both sides.
K
is in the
N
in the direction of
A
Turn the adjustable stand
4
grill position in order to simplify drainage
of grease and juice. For the closed position,
turn the adjustable stand back in the initial
position.
Preparation
Completely unwind the power cord
1
the cord winding device
the contact grill and lay it out.
Unlock the transport lock
2
pulling them upwards and then folding them
down.
Open the contact grill with the handle
3
Select a grilling position (See the "Grilling
4
positions" section).
Depending on the grilling position, position
5
one or both grease drip trays
grease drainage opening
Connect the power plug
6
socket.
Notes
When connecting to the power supply the
on/off switch I/0
E
To prevent foods from sticking to the grill
plates
put a few drops of cooking oil on
J
the plates and spread it with a brush or cloth.
Be careful, the plates can be very hot.
to the table
L
from
B
on the bottom of
H
on both sides by
K
.
P
, under the
Q
.
I
into the wall
B
must be set in position 0.

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis