Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Instruction manual valid for art.-no.: 070-50003_4_5
»Clear glass LED-headlamp
with frontreflector for hub dynamo«
Technical facts and references
1 high-performance-LED & 2 7000 MCD standlight-LEDs
u
V ehicular optical test requirement: German standard
u
Standlight via 2 button-batteries (CR2032)
u
With AUTO, ON, OFF switch
u
Switch-functions and cable connection
If the switch is positioned »ON«, the main-LED-bulb will light up. At the position »Auto«, the main-LED
u
turns off while the standlight-LEDs lighten up in dark environment. If the daylight-conditions get worse,
the main-LED will flash automatically, while the standlight-LEDs will turn off. Is the switch positioned
»OFF« , the light is completely turned off.
Plug-in connections:
Changing the batteries:
1.
Open the cover of the battery compartment, by
turning it into the arrow-direction.
3 lighting positions
are adjustable – TOP-,
MIDDLE- and LOW.
rearlight +
rearlight –
dynamo –
2.
Now change
the battery.
With voltage security system
u
With CDS sensor-function
u
W ith rear light connector
u
3 lighting positions are adjustable
u
dynamo +
Batteries do not belong to
the domestic waste. As
a consumer you have the
obligation to bring the
empty batteries back.
GB
Werbung
