Peaq PPA30BT-B Bedienungsanleitung Seite 43

3. During the battery charg-
ing the LED lights continu-
ously red.
Note
LED turns on continuously:
Battery charging.
LED twinkles: The capacity
of the battery is <20%. Bat-
tery must be re-charged.
LED turns off: Battery charg-
ing complete.
The speaker can still be
used during charging. It will
take approx. 2 hours to fully
charge the battery.
_PPA30BT_150519_V03_HR.indb 43
Pairing
1. Press On/Off button until
the LED turns on blue. The
speaker is ready for pair-
ing, when the LED twin-
kles in red-and-blue and a
sound is chimed.
2. Activate the
function on the audio de-
vice. Connect the Blue-
tooth-AV-Source with the
Speaker via
pairing.
ENGLISH
Bluetooth
Bluetooth
43
19/5/15 5:57 PM