Introducing The Hedgetrimmer; General Safety Instructions - Bauhaus HHSI 5246 Gebrauchsanleitung

Hedge Trimmer

1. Introducing the hedgetrimmer

Technical data
Operating Voltage
Nominal Frequency
Nominal Consumption
Cutting movements
Cutting length
Cutting capacity
Weight (without flex)
Noise Pressure Level L
pA
Vibration according to EN 60745
We reserve the right to make changes to the technical specifications.
Class of protection: II/DIN EN 60745/VDE 0740
Interference suppressed in accordance with EN EN 55014, EN 61000-3-2:1995, 61000-3-3:1995.
The devices are manufactured in accordance with the provisions of DIN-EN 60745-1and DIN-EN 60745-2-15 and fully
comply with the provisions of the German Product Safety Act.
Emissions
- The specified vibration emission value was measured by a standardized test methods and can compare with other
power tools are used.
- The specified vibration emission value can also be necessary for the assessment of work breaks are used.
- The specified vibration emission value can vary during the actual use of the electric tool by specifying the value,
depending on the way how to use the power tool.
- Note: You create the privilege against vascular pulsations of the hands in time breaks

2. General safety instructions

Noise emission information in accordance with the Ger-
man Product Safety Act (ProdSG) and the EC Machine
Directive: the noise pressure level at the place of work
can exceed 80 dB(A). In such cases the operator will
require noise protection (e.g. wearing of ear protectors).
Attention: Noise protection! Please observe the
local regulations when operating your device.
Usage of hedge trimmer always involves a risk of
accidents, therefore please observe the relevant
accident prevention instructions.
The machine has been constructed according to the
latest technology and in accordance with the recog-
nised technical safety regulations. Nevertheless, use
of the machine can involve risks to the user or third
persons, and can cause damage to the machine or
other objects.
Attention: Using electric power tools, you must observe
following fundamental safety instructions to protect
yourself against electric shock, against danger of injuries
and danger of fire. Read all these instructions before
using the hedge trimmer and observe them. Keep these
safety instructions at a safe place.
according to EN 60745
HHSI 5246
V~ 230-240
Hz 50
W 520
-1
min 1700
mm 450
mm
16
kg 2,5
dB (A) 84 [K 3,0 dB(A)]
2
m/s 4,0 [K 1,5 m/s
Use the machine in a safety conscious manner for
suitable applications in a technically perfect condition
only and with due regard to the operating instructions!
Immediately rectify or have rectified any faults which
could adversely affect safety!
This machine may cause serious injuries. Please
read the instruction manual carefully as to the correct
handling, the preparations, the maintenance and the
proper use of the hedge trimmer. Familiarize your-self
with the machine before the first use and also have
yourself introduced to practical use of the machine.
This appliance is not intended for use by persons (in-
cluding children) with reduced physical, sensory or men-
tal capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a person responsible
for their safety.
Children should be supervised to ensure that they do not
play with the appliance.
3. Application
The machine is only intended for trimming hedges. Use
for any other purpose constitutes inappropriate use. The
GB-1
Translation of the original Operating Instructions
ENGLISH
2
]