Werbung
Verfügbare Sprachen
Verfügbare Sprachen
c) Connect Power
LED Indicator Lights
• LED will flash while charging.
• The number of LED lights shown indicate current battery levels, for example:
Number of LED
0
Percent charged
0
Power ON / OFF
(Power ON / OFF button (5)). LED light(s) will show and indicate
• To turn power ON press
the battery level.
• To turn power OFF press and hold
If when you press
and no LED light(s) show, charge the base. See section
"Charging the Base Unit".
Charging the Base Unit
• Connect a Micro-USB cable to the DC mains input (2) and the other end to a power outlet.
Do not charge the base on a USB socket on your computer.
Charging an External Device
Through the USB charging port (4), the base unit can charge another device while it is charging
the Echo Dot. You can charge a mobile device when the base is not connected to the mains.
The power must be turned ON to begin charging. The max current of both ports
together is 4 A.
1
2
3
4
25
50
75
100
until the LED light(s) turn off.
Care and cleaning
• Disconnect the product from the mains and turn it off before each cleaning.
• Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as
they can cause damage to the housing and malfunctioning.
• Clean the product with a dry, fibre-free cloth.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product in accordance
with applicable regulatory guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the
environment.
Technical Data
Input voltage / current ................... 5 V/DC, 2 A
Output voltage / current ................ 5 V/DC, 2 A each port, max. 4 A together
Output type1 ................................. Micro-USB
Output type 2 ................................ USB
Battery .......................................... 3.6 V, 10000 mAh, Li-Ion battery
Battery life ..................................... < 10 h
Battery charge time ...................... 8 – 9 h
LED ............................................... 4 x LED
Operating conditions ..................... 0 to 40 °C, 10 – 90 % relative humidity
Storage conditions ........................ 0 to 40 °C, 10 – 90 % relative humidity
Dimensions (Ø x H) ...................... 80 x 59 mm
Weight .......................................... 262 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights
including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2017 by Conrad Electronic SE.
*1593803_v2_1117_JC_02_m_4L_(3)
Werbung
