Pickups; Electronics For All Models; Adam Clayton Signature; Bootsy Collins Infinity Black Star / Orange Star Signature - Warwick Adam Clayton Signature Gebrauchsanleitung

5) Pickups

Warwick uses pickups and electronics from the German manufacturer MEC (Music Electronic Company)
exclusively for all standard Warwick bass models. This continuing collaboration brings new ideas to the
market and delivers high quality. More information at: http://www.mec-pickups.de
Some of the Warwick Signature models are not equipped with MEC pickups or electronics according to
the preferences of the signature artists.
Factory setup:
The factory setup for the pickups is adjusted to a distance of 2 mm (0.08") between strings and pickup
while pressing down the highest an lowest string on the last fret.

6) Electronics for all models

TIP: To increase the life of your battery unplug the cable from the guitar between playing sessions.
If you need more information about the electronics, please download the wiring diagrams online at:
www.warwick.de

Adam Clayton Signature

Passive pickup / 2-band passive electronics
Bass
Treble *
Volume

Bootsy Collins Infinity Black Star / Orange Star Signature

Passive pickups / 2-band active electronics
*
10
Manual_WW_CS_2015_E_D.indd 10-11
*
* cut only
* Pulling the volume knob bypasses the onboard active
preamp and deactivates the tone controls. The top knob
controls volume, the bottom knob controls pickup balan-
ce.
**
** The top knob boosts or cuts the treble and the bottom
knob boosts or cuts the bass. If the top knob is pulled, it
splits the bridge humbucker pickup and sets it in single
coil mode.

Buzzard JE Signature

Active pickups / 2-band active electronics
*
**
Corvette „FSC ® Certified"
Active pickups / 2-band active electronics
*
**

Corvette $$

Passive pickups / 2-band active electronics
*

Corvette $$ Neck Through

Passive pickups / 2-band active electronics
*
* Pulling the volume knob bypasses the onboard active
preamp and deactivates the tone controls
** The top knob boosts or cuts the treble and the bottom
knob boosts or cuts the bass.
* Pulling the volume knob bypasses the onboard active
preamp and deactivates the tone controls
** The top knob boosts or cuts the treble and the bottom
knob boosts or cuts the bass.
* Pulling the volume knob bypasses the onboard active
preamp and deactivates the tone controls
** If the switch is in the upper position the neck (N) or
bridge (B) pickup works as a humbucker and is wired in
series. If the switch is in the middle position the neck (N)
or bridge (B) pickup works as a single coil. If the switch
is in the lowest position the neck (N) or bridge (B) pickup
works as a humbucker and is wired parallel.
* Pulling the volume knob bypasses the onboard active
preamp and deactivates the tone controls
** If the switch is in the upper position the neck (N) or
bridge (B) pickup works as a humbucker and is wired in
series. If the switch is in the middle position the neck (N)
or bridge (B) pickup works as a single coil. If the switch
is in the lowest position the neck (N) or bridge (B) pickup
works as a humbucker and is wired parallel.
11
01.06.15 14:32