Herunterladen Diese Seite drucken

cabstone DockingStreamer Betriebsanleitung Seite 2

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

EN User's manual
for DockingStreamer
Art.-No. 43317
Read this user's manual completely and carefully. It is part of the product and contains important notes for operating. Keep this document
for other users or for personal reference.
Safety Instructions
Risk of injury by improper procedure
>>
Compare the specifications of product and peripherals. These must be identical or within the specified range.
>>
NEVER leave the product unattended during operation!
>>
Only use in dry ambience.
>>
Do not short-circuit connectors and circuitries.
>>
Not for persons with reduced physical, sensory or mental capabilities, such as children for example.
>>
Do not modify product, product parts and accessories.
>>
Avoid stressing by heat and coldness, moisture and direct sunlight and avoid vibration and mechanical pressure.
Material damage by improper procedure
>>
Use product, product parts and accessories only in perfect condition.
>>
Not for direct connecting to PC / Notebook via adapter cable.
>>
Only analog audio data are supported. Attend to poit 1 under "Connecting and Operating".
>>
Only use a dry or slightly with water moistened and soft cloth for cleaning.
>>
Do not use cleaning agents and chemicals.
>>
Observe the national regulations and restrictions.
Description and Function
Your DockingStreamer is an Audio receiver for analog Docking stations
and is made for extending the interfaces of it by Bluetooth. This
allows you to play audio data without docked source device.
Housing
Operating LED
Bluetooth button (Bluetooth, Play, Pause)
Output socket (30 PIN DOCK)
Fig. 1: Product figure
Intended Use
Use the product only as described in chapter Description and Function. Use the product only in private home area. Commercial and other
use are not permitted and will void guarantee and warranty. The device uses an internationally harmonized frequency range. Nevertheless
attend to national regulations and restrictions. Misuse causes unforeseeable risks and can lead to injury and material damage.
Connecting and Operating
Connecting
Fig. 2: Connecting and Operating
Operating
Play/Pause:
Volume:
Warranty and Liability
The producer grants a warranty period of 2 years to a new device.
As the manufacturer has no influence on installation, warranty only applies to the product itself.
The manufacturer is not liable for damages to persons or property caused by improper installation, operation or maintenance, not descri-
bed in this manual.
Do not modify the product or its accessories.
Any use other than described in this user`s manual is not permitted and causes loss of warranty, loss of guarantee, and non-liability.
We reserve our right for misprints and changes of the device, packing, or user`s manual.
Maintenance, Care, Storage and Transport
Attend to the Safety Instructions.
The product is maintenance-free.
Always disconnect the (Bluetooth) connections when not in use.
Keep the original packing for transport and to avoid damages.
Disposal Instructions
According to the European WEEE directive, electrical and electronic equipment must not be disposed with consumers waste. Its components
must be recycled or disposed apart from each other. Otherwise contaminative and hazardous substances can pollute our environment.
As a consumer, you are committed by law to dispose electrical and electronic devices to the producer, the dealer, or public collecting points at
the end of the devices lifetime for free. Particulars are regulated in national right. The symbol on the product, in the user`s manual, or at the packa-
ging alludes to these terms. With this kind of waste separation, application, and waste disposal of used devices you achieve an important share to
environmental protection.
WEEE Directive: 2012/19/EU, WEEE No: 82898622
The 30PIN DOCK plug transmits both analog and digital data, your DockingStreamer transmits only
analog data.
1.
Make sure your Docking station supports analog signals. In doubt, ask its producer.
2.
Make sure your Docking station is in Standby Mode.
3.
Plug the DockingStreamer onto your Docking station by using its 30 PIN DOCK socket.
4.
Press the Bluetooth button and hold it until the Operation LED flashes.
The DockingStreamer now is in detection mode.
5.
Search for the "DockingStreamer" in your source device menu and connect it.
6.
Type in password "0000" and confirm the connection, if necessary
The DockingStreamer is ready to use, when the Operating LED shines permanently.
In use, press the Bluetooth button for 1 short time to switch between Play and Pause.
Set the volume by your source device or on the Docking station.
Designed in Germany, made in China.
Physical Size
Energy supply (via 30 PIN DOCK)
Bluetooth Protocol
Bluetooth Version
Frequency Range
Antenna Amplifying
Reach
Dimensions
Weight
Pillmannstraße 12
38112 Braunschweig
Germany
Revision 2014-01-07, V2
Specification
DC 5V
1A
A2DP
3.0 (A2DP/AVRCP)
2.402~2.480 GHz
max. 3dBi
8 m
41 x 41 x 6 mm
9.8 g

Werbung

loading

Diese Anleitung auch für:

43317