TopShot The Netherlands Montageanleitung
Kickertisch
Inhaltszusammenfassung für TopShot The Netherlands
- Seite 1 MONTAGEANLEITUNG TopShot The Netherlands Kickertisch...
-
Seite 2: Teileliste
Teileliste Teil Code Beschreibung Menge Unterlegscheibe 1/4” Mutter 1/4” Imbusschraube 5/16”x1-3/4” Unterlegscheibe 5/16” Imbusschraube 1/4”x1-1/4” Schraube 8#x1” Schraube 7#x5/8” Imbusschraube 5/16”x1” Support Rod 1/4” Querstrebe Seitenteil Spielfeld Strebe Kopfteil Linkes Standbein Rechtes Standbein Ball Box Torzähler Endkappe Handgriff Team 1 – 1 Player Stange Team 1 –... - Seite 3 MONTAGEANLEITUNG Hinweis: Montage sollte von 2 Personen ausgeführt werden 1. Plazieren Sie den Spieltisch mit der Spielfläche auf einen sauberen Untergrund. 2. Place on side panel (P1) upside down with the finished side facing out as shown in FIGURE 1. The ball entry hole will be closest to the floor. 3.
- Seite 4 MONTAGEANLEITUNG 4. Once you are sure you have the rods set up correctly, slide the other side panel )P1) onto the rods as shown in FIGURE 2. 5. Set the playfield )P2) into the grooves in the side panels. 6. Once you have the playing field set, place the playfield support braces (P3) on the playing field and slide the playing field support rods (H8) through the side panels and down the groove of the playing field support brace.
- Seite 5 MONTAGEANLEITUNG 7. Attach the end panels (P4) to the side panelsusing bolts (H5) and washers (H1) as shown in FIGURE 3. 8. Center the ball box (P7) over the opening of the panel (P4). Attach it using screws (H7) as shown in FIGURE 3. 9.
- Seite 6 MONTAGEANLEITUNG 10. Carefully flip the table over so it’s standing on it’s legs. Attach 1 rod handle (P10) on each player handle with the hole farthest away from the table. Make sure the handles are slid on completely. A drop of liquid soup will help them slide easier, Slide the rod end cap (P9) on the other end of each rod.