Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ENGLISH
• Protect connectors from moisture.
Prevent property damage
F
Y
S
OR
OUR
AFETY
• Never carry the power supply by its
electrical cable or pull at the cable.
Read instruction manual
• For separating the connection always pull
This manual contains information for the safe
on the plug, never on the cable.
handling of those power supplies which are
• Cables must be installed safely to avoid
listed on the front page.
tripping over.
It explains the installation of the mains (AC)
• Disconnect the power supply during thun-
and secondary (DC) adapters.
derstorms.
• Always read the instruction manual first
• Only use original FRIWO spare parts or
before using the power supply.
accessories.
• The instruction manual is part of the
product and should always be at hand.
• The Illustrations in this instruction manual
may differ from the actual look of the
power supply.
Prevent shock-hazard
• Never use a power supply with damaged
housing or cable.
• Never modify a power supply or open its
housing.
• Connect the power supply to a regular
installed outlet only.
10
11
D
U
C
A
ESIGNATED
SE
ONNECTION OF
DAPTER
The power supply feeds electronic devices or
AC input (mains supply):
modules. It is suitable:
• For the connection to power grids (AC input) and
DT 100, 150
Power supply with C14-
the DC output of devices which are compatible
adapter. → M
OUNTING
with the electrical characteristics of the power
DT 60
Power supply with C8-
supply.
FW 7402, 8030/DT
adapter. → M
OUNTING
• For indoor use only.
FW 7333S, 7583,
Power supply with inte-
• For service in compliance with the technical data.
7599, 7600, 7601,
grated mains adapter for
The following restrictions apply:
7710, 7715, 7713
different regions.
• Never use the power supply for life-saving or life-
FW 7520, 7530,
Power supply with inter-
sustaining equipment.
7540, 7556, 7650,
changeable mains adapter
• Never use outdoors.
7660, 7662, 7711,
for different regions.
• Never immerse in water or other fluids.
7712, 8000, 8001,
→ M
OUNTING
• Dry location use only.
8002, 8030
• Protect from spray water.
• Avoid the following ambient conditions:
− High humidity with risk of water condensa-
tion.
− Permanent vibrations.
− Strong temperature fluctuations.
12
13
DC output:
M
AINTENANCE AND TROUBLESHOOTING
N O T I C E
W A R N I N G
Reversed polarity (plus and minus) can damage
the electronics of the connected device!
Risk of lethal electric shock if fluid leaks into the
power supply!
• Observe the polarity signs on the plug before
connecting. → M
• Disconnect power supply before cleaning.
OUNTING
• Do not use fluids for cleaning.
• Wipe with a dry cloth only.
N O T I C E
Do not use chemical cleaning agents.
The combination of secondary adapter and
The power supply is maintenance-free. In case of a
power supply can not be disconnected!
faulty power supply or malfunctions that can not be
• Connect only when plug is to be permanently
solved, please contact the dealer or FRIWO.
mounted.
Different secondary adapters (coax plugs or jacks)
can be connected to the DC output. The polarity is
set by rotating the plug. → M
OUNTING
14
15
T
D
M
| M
ECHNICAL
ATA
ONTAGE
OUNTING
General
Electrically
AC
Service tempera-
0 ... +40 °C
DT
ture
100
Storage tempera-
-40 ... +70 °C
150
ture
see printing
DT
Humidity
<95 %, non-
on power
condensing
60
supply
8030/DT
Protection rating
IP 40
Protection class
II
FW 7402
FW
Length of DC out-
1,8 m
7540
put cable
7556
D
ISPOSAL
7660
7662
N O T E
7711
Environmental contamination caused by
7712
incorrect disposal!
• Cut off the cable of the power supply and
dispose the unit via the designated take-
back system.
16
17
AC
DC
FW
8000
8001
8002
8030/DT
FW
7520
7530
7650
18
19
Werbung
