Goobay 95930 Betriebsanleitung Seite 2

User's Manual
User's manual for
EN
for Car Charging Cables
internal Card reader
Article number: 95930, 95931, 95932
Read the user`s manual completely and carefully. It is part of the product and includes important information for proper installation and
use. Keep this user's manual for clarification and only pass it on together with the product.
Safety Instructions
Risk of injury by improper procedure
>> Before working on opened computers, always unplug the mains plug!
>> Compare the specifications of product, power supply and peripherals. These must be identical or within the specified range.
>> Do not modify product, product parts or accessories and do not open the housing.
>> Let a professional do maintenance and repair work.
>> Avoid extreme conditions, such as extreme heat, cold, humidity or direct exposure to the sun, as well as vibrations and mechanical
pressure.
>> Do not short-circuit ports and circuits.
Material damage by improper use
Maintenance, Care
>> The product is maintenance-free.
>> Do not use detergents and chemicals.
Intended Use
>> Use product, product parts and accessories only in perfect condition.
>> Only use in dry ambience.
>> Not meant for children and persons with limited mentally and/or physical ability.
Description and Function
Your product is an internal card reader, made for inserting into 3.5" insertion slots and for extending your computers interfaces. Depending on the
model, the internal connection types vary by the same card formats.
Model
Scope of Delivery
Operating elements
Card formats:
USB ports
Operating LED (shines in operation)
Card reading LED (flashes during reading and writing)
Specifications
Dimensions
Weight
Motherboard Connections
Mounting the card reader
1. Unplug the mains plug from mains.
2. Open the computer housing and remove the cover.
3. Slide the card reader into a free 3.5" insertion slot of your computer housing and and fix the card reader by screws.
4. Connect the connection cables at the rear side of the card reader to the main board.
Attend to the notes in the Mainboards user's manual.
Attend to safe cable laying and that no cables obstruct other computer components.
5. Close the computer housing.
6. Re-plug the mains plug and switch on all devices.
Installing thr Driver software
The device works by Plug ‚n' play.
No driver software is needed.
Operating
The green LED shines when ready to use.
The red LED flashes during writing or reading.
Plugging in/Removing memory cards
Insert the memory card into a fitting card slot.
Attend to the right orientation and do not apply excessive force!
Several card slots can be used in time, when you would like eg. to copy data between several memory cards.
Never unplug memory cards during running actions. This can damage the memory card.
Reading/Writing memory cards
Every slot of the card reader will be integrated as conventional drives.
Disposal Instructions
According to the European WEEE directive, electrical and electronic equipment must not be disposed with consumers waste. Its components
must be recycled or disposed apart from each other. Otherwise contaminative and hazardous substances can pollute our environment. You as
a consumer are committed by law to dispose electrical and electronic devices to the producer, the dealer, or public collecting points at the end
of the devices lifetime for free. Particulars are regulated in national right. The symbol on the product, in the user`s manual, or at the packaging
alludes to these terms. With this kind of waste separation, application, and waste disposal of used devices you achieve an important share to environ-
mental protection. WEEE No. 82898622
by Wentronic GmbH | Pillmannstraße 12 | 38112 Braunschweig | Germany
95930 95931
USB 2.0 card reader, driver CD, User's manual
SLOT 1: MS Serie
SLOT 2: SD/SDHC/SDXC Card Serie/MMC
SLOT 3: CF/MicroDrive Serie
SLOT 4: Micro SD/SDHC/SDXC/T-Flash/M2 Serie
SLOT 5: XD Serie
USB 2.0
green
102 x 93.7 x 25 mm
85g 225g
8 PIN
REV 2014-11-11 | V 2
95932
USB 3.0 card reader,
driver CD, User's manual
USB 3.0
red
102 x 121 x 25 mm
252g
5.25 Power plug 4PIN,
19PIN