Connection Diagram - Zenec Ze-Rvtx Bedienungsanleitung

CONNECTION DIAGRAM:

Head Unit
Receiver Module
WIRE DEFINITION:
Transmitter (TX)
• red wire for connecting to the positive power supply (+12V)
• black wire for connecting to the ground (-)
• yellow female RCA for connecting to the video output of the reversing camera
• red female RCA for connecting to the audio output of the reversing camera
Receiver (RX)
• red wire for connecting to the positive power supply (+12V)
• black wire for connecting to the ground (-)
• yellow male RCA for connecting to the video input of the head unit
• red male RCA for connecting to the audio input of the head unit
Red Receiver
Wire: PWR (+12V)
Black
GND
Wire:
Yellow Video
RCA: Out
Red
Audio
RCA: Out
Pairing Button
LED Status Light
Rear View Camera
Transmitter Module
4
Red Transmitter
Wire:
PWR (+12V)
Black
GND
Wire:
Yellow Video
RCA: In
Red Audio
RCA: In
Pairing Button
LED Status Light