Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Manual
WR 205
Applicable for
113-014-00-205-00
Specifications
Power Supply
Music Power
Speaker Impedance
WLAN Standards
Protocols
Airplay, UPnP, DLNA
Maximum distance between
(* ... a wireless radio frequency
site survey is recommended in
tansmitter an receiver
harsh environments)
Dimensions (H/W/D)
71 x 145 x 29,5 mm
Weight
Operating Temperature
With the use of electronic transformers (lighting) and
BTR 205, the following points have be observed to avoid
potential problems:
- Cables between transformer and lamp < 2m.
- Power line cables to be kept at a distance of 5-10 cm from speaker
cables (AC coupling).
- RF cables to be kept at a great distance from any metal surfaces
(reduction of capacitive coupling).
- When the RF cable to the transformer is > 2m twist the single wires.
- Power line cable and RF cable not too close to the WR 205.
- Power line cables are not to be crossed or to run at right angles.
This product supports all CE-
marking criteria. The declaration of
conformity certificate can be ob-
tained from WHD.
Operation
Thank you for buying our WLAN audio receiver for hidden mounting.
Please read this manual carefully, especially the safety and security information.
Mounting and connections
- Install the cables (230V, speaker cabel) for the WR 205 in accordance with installation gui-
delines, and your desired port scenario
- If the device shold be inserted through a cut out, make sure that it fits in.
! Obstruct the device only in locations that ensure sufficient temperature dissipation.
Not e.g. in wool, because the device can drop out at high temperature.
Connecting power supply
WR 205
110...230 V AC
110-230 V
2 x 5 W
50/60 Hz
4 ohms each
IEEE 802.11b/g/n
up to 150 Mbps
up to 30m*
In addition to this guidance please comply with your own country-specific safety & security
regulations.
The device is not suitable for outdoor operation.
0,220 kg
- The electrical supply must be disconnected before working on the device.
- Keep the original packaging (for returning products under warranty).
0 °C ... +30 °C
- Protect the product and the components supplied against dripping or splashing. Make
sure, as with all electronic products that no liquids can access any part of the system. This
may cause a malfunction or fire.
- Do not expose the product to temperatures above 30° C.
- Do not expose the product to electrostatic discharges.
- Never put the product near heat sources such as radiators, heat registers, stoves or other
types of devices that produce heat.
! Please note the country-specific safety guidelines for use and operation of WLANs.
! For continued flawless audio transmission you should always use a wireless router from
802.11n and the latest smartphones / tablets.
Product registration and extended warranty at:
www.whd.de/Produktregistrierung
WHD are members of the INTERSEROH association.
We participate in the dual system as well as other
industry-specific solutions. Therefore, plastic, metal
and electronic parts can all be recycled.
Connecting speakers
- Open access panel of
the housing
- Connect 230 V cable
OUT L -
according to imprint
L +
OUT R -
R +
! When power is connec-
ted the WR 205 is auto-
4 - 8 Ohm
matically in Pairing
Mode.
Safty & Security Informations
Improper handling may void warranty!
Direct Play
1. Enter WLAN menue at your smartphone,
tablet or PC and seek for available wireless
networks.
2. Select WHD-Air + MAC address. Your
smartphone, tablet or PC connects to the WR
205. Now you can send music from your
smartphone, tablet or PC, directly to the WR
205.
! Some playback devices and players also have
Connect speker cable
a WiFi-Direct connection without pre-
according to imprint
connecting.
Max. per output:
1x 4Ω speaker
WLAN Operation
2x 8Ω speaker ||
1. Enter WLAN menue at your smartphone,
5x 20Ω speaker ||
tablet or PC and seek for available wireless
networks.
2. Select WHD-Air + MAC address. Your
smartphone, tablet or PC connects to the WR
205.
3. Start the WHD Multiroom Audio Player
App, which you can download via App Store or
Google Play Store for free.
4. Select in the WHD Multiroom Audio Player
App the „Assistent" and follow the user
prompts.
! The App connects the WR 205 to your
WLAN. This procedure may take a few minutes.
Multi Play
Multi Play is defined as the simultaneous play-
back of a music player on several WR 205.
Using the WHD Multiroom Audio Player App
you can, for example, play music in several
rooms simultaneously.
! All WR 205 have to share the same wireless
network with min. 150 Mbps.
! Use the WHD Multiroom Audio Player App
only.
WHD - Wilhelm Huber+Söhne GmbH+Co.KG
Bismarckstr. 19
D-78652 Deißlingen
Tel. Zentrale +49 74 20 / 8 89-0
Fax Zentrale +49 74 20 / 8 89-51
Version
(Technical and optical
modifications reserved)
28.09.2015
E-Mail:
info@whd.de
Web:
www.whd.de
Werbung
