freeVoice Tube Bedienungsanleitung

E E
Content of package Connecting and using your headset
Charge
Connect the headset› or charger› micro-USB port to your PC or USB main
adapter with the USB lead.
During charging, the LED shows constant red; once the battery is fully charged
Micro-USB 1 nano-pad,
Headset
the LED changes to blue.
charge lead 1 adhesive pad
If the headset is not used for longer than 8 minutes it automatically switches
itself «Off».
Connecting the headset to the telephone (pairing)
Charger 1. Make sure that the headset is switched off (see «Headset Off»). Open the
3 silicon 2 ear clips Car clip
Bluetooth menu on your telephone.
EarGel 2. Keep the call acceptance key pressed for approx. 5 seconds until the LED
flashes red and blue alternately; you will then hear the voice message
«Pairing» in the headset.
Overview
4. Now select «Tube FBT250». If you device requests a PIN, enter «0000».
Call acceptant key Micro USB
IMPORTANT: If pairing is not completed within 90 seconds it has not been
successful and you should repeat steps 1 to 3.
Headset LED
Pairing the headset with two telephones
(multipoint connection)
Auto Clip
The freeVoice Tube supports the multipoint function in order that the headset
can be connected with two telephones simultaneously.
1. Proceed like described in the section «Connecting the headset to the
Charger LED
Micro USB telephone (pairing)» to connect the headset to the first telephone.
2. Switch the headset off again and repeat the same pairing procedure for the
Nano Pad
second telephone.
4. Now select the headset again in the Bluetooth menu of the first telephone.
Accept/end a call
Headset «ON»
1. Press the call acceptance key to accept a call.
Keep the call acceptance key pressed for 2 sec; the LED starts to flash in blue
2. Press the call acceptance key again to end the call.
and you will hear a triple tone in the headset.
Connected with two telephones (multipoint)
Headset «OFF»
1. Press the call acceptance key to accept the second call, the first call is put on hold.
Keep the call acceptance key pressed for 2 sec, the LED lights up once in red and
you will hear the voice message «Power Off»
FINAL_sup_201601_fv_tube_bedanleitung.indd 1
E E
Toggle
1. Press the call acceptance key twice to switch between the two telephones.
Redial
Press the call acceptance key twice to call the last number dialled again.
Dismissing an incoming call
Keep the call acceptance key pressed for approx. 2 seconds to dismiss an
incoming call.
Mounting in the car
The charger of the «Tube FBT250» is mountable on the ventilation grid of the car
with the included holder (clip).
+ + =
Technical data
Bluetooth Class 2 Version 4.1 Talk time: 4-6 hours
CVC echo and noise cancelling Music playback time: 4-6 hours
CSRBC86 chipset Standby time: 150 hours
Micro-USB charge connection Charging time: approx. 2 hours
Support HFP, HSP and A2DP IPhone battery display
Multipoint Bluetooth with two FCC
telephones CE
Range: up to 10 metres Acoustic shock
45mAh battery
Disposing of the product
Please dispose of the headset in accordance to the local regulations and use
the available recycling facilities. Do not dispose of the headset together with
domestic waste. Keep the headset away from fire since the battery could
otherwise explode. The battery can also explode if damaged.
Garantie/Garantie/Warranty
D
Folge- und Begleitschäden, einschliesslich, jedoch nicht beschränkt auf Sachschäden
sowie Schäden, die aus der Verletzung von expliziten oder impliziten Garantien resultieren,
unterliegen nicht der Verantwortlichkeit der freeVoice AG und sind innerhalb des gesetzlich
zulässigen Rahmens ausgeschlossen.
F
Les dommages indirects ou fortuits, y compris, sans limite aucune, les pertes
de propriété et les dommages résultant du non-respect de toute garantie
explicite ou implicite ne tombent pas sous la responsabilité de freeVoice AG et sont exclus dans
la mesure où ceci est autorisé par la loi.
E
Consequential and incidental damages, including without limitation, loss of property and
those arising from breach of any express or implied warranty,
are not the responsibility of freeVoice AG and to the extent permitted by law, are excluded.
Benötigen Sie Hilfe?
Besoin d'aide?
Need help?
freeVoice AG
www.freevoice.biz
Friedackerstrasse 14
E-Mail: info@freevoice.biz
CH-8050 Zürich
Fon: +41 44 542 40 30
Switzerland
Zertifikat/Certificate
UID: CHE-166.396.031 (Switzerland)
EMC Directive
Certificate No.:
Tube
Bedienungsanleitung
Manuel d'Utilisation
User Manual
11.02.16 17:31