Change Battery - RUSTA 913502260101 Gebrauchsanweisung

1. Remove the protective plastic from the solar panel and turn the power switch to the
'on' position. The power switch is located at the back of the solar panel.
2. Place the solar light in direct sunlight for 6–8 hours to charge the rechargeable battery
before using it for the first time. The light will come on automatically when it gets dark.
3. If the light does not come on automatically at night, even after being in sunlight for 6
hours, check the following:
- That the battery is in contact with the poles and that the + and - poles are correctly aligned.
- That the light is in a sunny location and that the panel itself faces the sun.
The lights contain a PIR motion sensor increases the light intensity for 30 seconds.
The sensor has a coverage area of up to 6 m, 80–120°.

CHANGE BATTERY

• Twist the cap (B) on the head of the light (A) anti clockwise
and remove it.
• Invert the cap (B) and unscrew the battery holder cover.
• Remove the battery and insert a new rechargeable
AAA-battery (with at least 500 mAh capacity). Check that you
have inserted the new battery correctly.
• Screw the cover back in place on the batter holder and fully
charge the new battery.
• Dispose of the spent battery at a recycling station.
B
A
B
3