Operating - ClickTronic 60804 Betriebsanleitung

Sample Figure: The models differ in the number
of outputs.

5.2Operating:

Switch the Quad HD splitter on or
off by pressing the POWER switch for
one time.
Controlling:
• HDMI™ connections require the EDID and
HDCP data between source and output de-
vices for successful communication.
• Make sure your source device supports auto
detection and adjustment of resolution, color
depth and audio format.
• Your splitter comes with 2 detection modes.
• The mode selector switch is located on the
back of the splitter.
• The standard-setting mode is A.
• Ensure that all source and output devices
support the same formats.
Mode A - Automatic detection
(lowest standard first):
A/B
Source device supports automatic detection
and adjustment:
Based to EDID information of all devices, the
source device with the lowest standard is set as
primary device.
Source device does NOT support automatic
detection and adjustment:
Set the output resolution and color depth of the
source device manually to the output device
data with the lowest standard.
Mode B (priority mode):
A/B
Connect the primary output device you want to
communicate with the splitter on port 1.
Source device supports automatic detection
and adjustment:
The output device on port 1 is automatically
selected as primary device and sets up its
Clicktronic® 13