Werbung
Verfügbare Sprachen
Verfügbare Sprachen
McGrey PB-5100 Power Bank
Art. Nr. 00037415 / 00037416
Musikhaus Kirstein GmbH
Bernbeurener Strasse 11
D-86956 Schongau / Germany
Tel.: 0049-8861-909494-0
www.kirstein.de
Technical Data:
Capacity: 10.000 mAh
Rechargeable battery type: 4 x 2600mAh Lithium-Ions
Voltage/Current Input: 5VDC/1A
Voltage/Current Output (1): 5VDC/2.1A (max) - Output (3): 5VDC/1.0A (max)
Working temperature: -20°C ... 40°C
Weight: 300gr / Dimensions: 108mm x 72mm x 22mm
Precautions:
Please read this instructions carefully. Use only a 5V power adapter for charging, otherwise you may cause
damage to the device. The product is not suitable for children as it contains fragile and small parts that can be
swallowed easily. Please do not drop and do not immerse in water as the unit will be damaged. Do not expose to
high temperatures or flammable gases. Please do not remove the housing. Please don't directly connect any
contacts as this can lead to short circuits.
Disposal!
Your product is designed and manufactured with materials and components of high quality, which are recyclable
and can be reused. The symbol means that your product should be disposed of separately from household waste
when it reaches its end of life. Please dispose of this equipment at your local collection point or recycling center.
Please help to protect the environment in which we all live.
Operation:
Please load your Power-Bank completely before first use. Connect the Power-Bank
Micro-USB jack (2) to a 5VDC source. Use the USB cable (accessory) together with
the adaptor which fits in the jack. For loading you can use an USB output from your
computer, or an external AC/DC net adaptor (5V). Please note: very often you can use
the net adaptor of your device if it has a 5V USB connector. After connecting the
Power-Bank to a 5VDC source the display (4) will show the actual state of charge [%].
After you completely charged your Power-Bank you can use it for loading your
smartphone, MP3-player, etc. Connect your device with an USB cable to output (1) or (2) of the Power-Bank. Please note max.
output current. If the charging cable of your device has an USB connector it is best to use this cable. After connection was made the
Power-Bank display will show actual state of charge for several seconds and then switch to standby mode. By pressing the power
on/off button (5) again the display will be switched on again. This will work even when no device is being charged. In case of
emergency you can use your Power-Bank as a torch. Push the on/off button (5) two times in quick succession and the LED light on
the opposite side will shine.
ENGLISH
Werbung
