Description Of Front Panel Operation And Lcd Information; Replacement Of Malfunctioning Drive And Data Rebuild Instructions - Raidon SafeTANK Benutzerhandbuch

Step 4 Mount your hard drives onto the removable drive tray and secure it with the screws included in the accessory kit to avoid any
damage to the hard drive due to accidental movements.
Step 5 Choose one of the provided cables of your preference to connect the preferred interface connection on the enclosure unit to
the computer.
Step 6 Attach the AC power cable to the power socket. Once completed, you may power on the unit.
!
Once your computer has also booted, your operating system should recognize the drive automatically. If the hard drive installed
requires formatting, follow the formatting instructions given by the operating system to format the drive volume to your preference.
Once the formatting has been completed, the device is ready for use.
!

5. Description of Front Panel Operation and LCD Information

!
!
Level 0 Level 1
Quick Setup
Disk Manager
!
EXTERNAL 4 BAY
RAID Manager
HARDWARE RAID
System Manager
!
!
!

6. Replacement of Malfunctioning Drive and Data Rebuild Instructions

!
!
When a front hard drive indicator has lit up red and the audio alarm sounds, this could mean the indicated hard drive may be
malfunctioning. If this occurs, you may press the mute button at the rear of the system to shut off the audio alarm and power off the
Level 2
Create One RAID
Delete All RAID
Identify Disk
Show Disk Info
Identify RAID
Create RAID
Delete RAID
RAID Info
Change RAID Pwd
Rebuilding Priority
Standby Timer
System Info
Change Password
Logout From Menu
Alarm Control
Hardware Monitor
! 5
SafeTANK GR4670-WSB3 User Manual
Level 3
RAID 0 / RAID 5
Disk 1
Disk 2
Disk 3
Disk 4
< Disk Info >
Select RAID
RAID 0 / RAID 5
Select RAID
< Password > for RAID setup
Highest/High/Medium/Low/Lowest
< 99999min >
Firmware Version
< Password > for System Info
< Y or N >
Mute the Buzzer
Voltage Monitor
Temp. Monitor
FAN Monitor
Level 4
Select Disk
Check Disk LED
Check Disk LED
Check Disk LED
Check Disk LED
Select Disk
< 3.3V / 5V / 12V >
< Temp. >
<Fan Speed/Fan Level>