Process Value Input - CGS Instruments XT-T1 Betriebsanleitung

E
7.2 Functions
We recommend the following procedure:
• Familiarize yourself with the controller functions
• Enter the configuration codes and the parameter values in the tables provided for this purpose
• in Chapter 7.4 Write down the appropriate values (
rameters and the configuration codes are listed in the order of their appearance. Parameters which are
not relevant are masked out (see table below).
• Enter the configuration code and parameters on the instrument

7.2.1 Process value input

Product:
Temperature controller XT-T1

) or mark selection with a cross (
Revision 1.1 – Issue February 2016

). The pa-
62/84