Danger Of Electric Shock And Fi Re; Equipment And Device Damage - Mr. Magic 3531 Gebrauchsanleitung

Danger of electric shock and fi re
❐ Only connect the device to a socket that is properly installed and corresponds with the
technical data of the device (see the "Technical data" chapter).
❐ Position the cable in such a way that it does not become squashed or bent and does not
come into contact with hot surfaces.
❐ Remove the mains plug from the mains socket:
– before you remove and / or replace the mixing beaker,
– if you do not use the device,
– before a thunderstorm or
– before you clean the device.
❐ When you want to remove the mains plug from the socket, always pull the plug and not the
cable.
❐ Never immerse the device in water or other liquids! Ensure that the device, cable or mains
plug do not fall into water or become wet.
❐ Should the device fall into water, switch off the power supply immediately.
❐ Never touch the device, cable or plug with wet hands.
❐ Never cover the device with cloths or something similar. There is a danger of overheating!
❐ Maintain a suffi cient distance from sources of heat such as hobs or ovens.

Equipment and device damage

❐ Always check the device for damage before putting it into operation. The device must not be
used if the device, the cable, the plug or any of the accessories show obvious signs of damage.
❐ If the device is broken, do not attempt to repair it yourself. In the event of any damage,
please contact our customer service.
❐ Use only the accessories supplied, or accessories expressly recommended by the
manufacturer. Use only original spare parts from the manufacturer.
❐ The device should only be used when it is fully assembled, undamaged, and operational!
❐ The device should only be used in closed rooms.
❐ Never operate the device when it is empty.
❐ Ensure that it is not possible for others to trip over the connected mains cable. Do not allow
the cable to hang over the edge of tables or kitchen counters. Others may become caught
and pull the device down.
❐ Do not drop the device or allow it to be knocked violently.
❐ Always place the device on a dry, even, and fi rm base.
❐ Make sure that your working area is always well lit when using the device.
❐ You may wish to place a non-slip mat underneath the device so that the surface is not
damaged.
❐ Do not expose the device to extreme temperatures, wide temperature variations, or direct
sunlight.
❐ Always keep hold of the motor unit with one hand while preparing food.
12