INSTRUCTIONS
PAIRING TO YOUR DEVICE
To pair to your phone or device for the first time hold down the play button
on the control panel for 4 seconds until you see a red and blue flashing light. Open your
Bluetooth settings on your phone or device. You will see the name MUSIC HAT appear in
the list. Select MUSIC HAT, and you will now be connected.
ACCEPTING CALLS
To take an incoming call press the Play/Pause
will automatically stop. To end a call press the Play/Pause
Play/Pause
button will re-dial the last number.
REJECT CALLS
Hold the Play/Pause button for 2 seconds to reject an inomcing call.
PLAYING MUSIC
Select your music from your phone or device. Use the buttons on your control panel to
Play/Pause and Skip tracks.
POWER ON
Simply hold down the Play/Pause
POWER OFF
Simply hold down the Play/Pause
down if Bluetooth connection fails in 3–5 minutes.
CHARGING INSTRUCTIONS
The charging port is located below the control panel.
1. Fully charge battery before first use.
2. Use the supplied USB cable, simply plug into the charging port of the headwear.
3. Now plug the other end of the USB cable into your PC or laptop.
4. During charging, the LED status light will turns to be red on the control panel.
5. When charging is completed, the red light will change to blue.
6. It will take about one hour charging time to get the battery full charged.
button. If you are listening to music it
button for 4 seconds to turn on.
button for 4 seconds to turn off. Speaker will shut
located
button. Double click the
3