Adjusting The Air Supply - INNOCIGS CUAIO D22 Bedienungsanleitung

INNOCIGS CUAIO D22 – USING THE DEVICE
Vaping
While holding the fire button of your e-cigarette, inhale the vapor slowly and continuously through the mouth-
piece of your clearomizer. Release the fire button while exhaling the vapor.

Adjusting the Air Supply

By gently turning the airflow control ring on the top cap, you can increase or decrease the air supply according to
your personal preference. The more air flows through the device (the more the slots are open), the lower is the
drawing resistance. Pay particular attention to a sufficient air supply during sub-ohm vaping.
Changing the Mouthpiece
The mouthpiece is placed on the top cap of the Clearomizer. It can be removed by gently pulling up and once
again attached by applying gentle pressure on clearomizer. The mouthpiece may be cleaned with warm water.
Make sure that it is completely dry before reinserting into the clearomizer.
53