Connecting Antenna - Yamaha PDM-4210E Bedienungsanleitung

INSTALLATION INSTRUCTIONS

Connecting Antenna

Make sure that the power switch of the monitor is turned off.
Speaker (R)
EUROPE
antenna
Precautions when connecting the antenna
• Please use a coaxial cable which is not prone to interference to connect the antenna. Avoid using a parallel
flat feeder wire as interference may occur, causing reception to be unstable and stripe noise to appear on
the screen.
• Avoid using an indoor antenna as this may cause interference. Please use CATV net or outdoor antenna.
• Keep the power cord as far away from the antenna wire as possible.
If there is noise apparent in the picture of VHF-Low band channel, please use double-shielded cable (not
provided) for RF LEADS to reduce the noise.
46
U.K. ONLY
20 18 16 14
21 19 17 15 13
Monitor rear panel
12 10 8 6 4 2
11 9 7 5 3 1
Speaker (L)