Seite 1
Expansion Cards ECU04-E ECU04-E USB 3.1 PCI Express card with internal 19pin connector l 19pin connector...
Seite 2
The following manual and guides were carefully prepared by the SilverStone engineering team to help you maximize the potential of your SilverStone product. Please keep this manual for future reference when upgrading or performing maintenance on your system. A copy of this manual can also...
*** Windows 8, 8.1, or 10 supports ECU04-E automatically so you do not need to install additional driver for it. **** User should check for XHCI function in Ubuntu/Linux or Mac OS, if computer system supports XHCI function then it can support ECU04-E automatically without additional driver...
Seite 4
Installieren Sie die ECU04-E im PCI-E-Steckplatz am Motherboard Installez l'ECU04-E dans l'emplacement PCI-E de la carte mère Instale el ECU04-E en el zócalo PCI-E de la placa base Installare ECU04-E nell’alloggio PCI-E sulla scheda madre Установите карту ECU04-E в слот PCI-E на системной плате...
Seite 5
Expansion Cards ECU04-E Installation Guide 15-pin SATA power connector Connect to 15pin SATA power connector Mit einem 15-poligen SATA-Stromanschluss verbinden Connexion au connecteur d’alimentation SATA à 15 broches Enchufe el conector de potencia SATA de 15 pines Collegare al connettore di alimentazione SATA a 15 pin Подключите...
Seite 6
Expansion Cards ECU04-E Installation Guide 19-pin USB connector Connect to internal 19pin USB 3.1 connectors (refer to illustration) Mit internen 19-poligen USB 3.1-Anschlüssen verbinden (Vgl. Abbildung) Connexion aux connecteurs internes USB 3.1 à 19 broches (voir l'illustration) Enchufe los conectores internos USB 3.1 de 19 pines (consulte la ilustración) Collegare ai connettori interni USB 3.1 a 19 pin (Fare riferimento all’illustrazione)
Seite 7
Expansion Cards ECU04-E Installation Guide Plug in your USB 3.1 device and enjoy the 10Gbit/s USB 3.1 super speed transfer rate Schließen Sie Ihr USB 3.1-Gerät an und genießen die USB 3.1-Super-Speed-Übertragungsgeschwindigkeit von 10 Gbit/s Branchez votre périphérique USB 3.1 et bénéficiez du taux de transfert de 10 Gbit/s de l'USB 3.1 SuperSpeed Conecte su dispositivo USB 3.1 y disfrute de la súper velocidad de transferencia de 10Gbit/s de USB 3.1...
Seite 8
1. In windows 7 or previous version, please install the ASM1142 driver to enable SuperSpeed USB 3.1 performance. 2. Windows 8, 8.1, or 10 supports ECU04-E automatically so you do not need to install additional driver for it. 3. User should check for XHCI function in Ubuntu/Linux or Mac OS, if computer system supports XHCI function then it can support ECU04-E automatically without additional driver installation.
Seite 9
1. В ОС Windows 7 или предыдущих версиях установите драйвер ASM1142 для включения функции SuperSpeed USB 3.1. 2. В ОС Windows 8, 8.1, или 10 карта ECU04-E поддерживается автоматически, поэтому установка дополнительного драйвера не требуется. 3. Пользователь должен проверить наличие функции XHCI в ОС Ubuntu/Linux или Mac OS, если ОС компьютера...
2. Under warranty, SilverStone Technology’s maximum liability is limited to the current market value for the product (depreciated value, excluding shipping, handling, and other fees). SilverStone Technology is not responsible for other damages or loss associated with the use of product.