Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating elements
a) Dehumidifier
1
3
1
3
1 Air outlet grid
2 Handle
3 Control panel
4 Air filter frame
b) Water tank
9 Float
10 Front recess for power cable or
drain hose
c) Control panel
17
16
15
14
18
19
2
2
4
4
5
5
6
6
7
8
7
8
5 Air intake grid
6 Water tank (removable)
7 Wheels (4 x)
8 Mains cable with mains
plug
9
9
10
10
13
12
11
21
20
16 LED
11 LED FULL
17 LED
12 LED POWER
18 SPEED button
13 LED SETTING
19 TIMER button
14 Display
20 SETTING button
15 LED TIMER
21 POWER button
Button /
LED colour
LED
FULL
red
POWER
green
SETTING
green
17
16
15
TIMER
green
17
16
LED
: green
SPEED
LED
: red
Operation
a) Setting up and connecting
18
19
Leave a distance of at least 20 cm between the device and any walls, furniture, etc.
18
The dehumidifier may only be operated on a dry, even and secure surface to prevent
tipping or rolling away.
Use the handle (2) and the wheels (7) to move the dehumidifier.
• Connect the power plug (8) to a common household power outlet. The product emits a beep.
The LED POWER (12) lights up. The product is in standby mode. The display (14) shows
the current humidity.
b) Switching on/off
• Press the button POWER (21) to turn on the product. The product emits a beep and begins
dehumidifying via the air outlet grid (1).
• After use, reactivate standby mode by pressing the POWER button again. All operating LEDs
except for the POWER LED go out. The display continues showing the current humidity.
• Disconnect the power plug from the power outlet to turn off the product completely. The
POWER LED and the display go out.
17
16
15
14
c) Setting the fan speed
17
16
15
• Press the SPEED button (18) to select one of two levels. The respective LED lights up.
•
SPEED LED (16): low fan speed
•
SPEED LED (17): high fan speed
Depending on the setting, one of the two SPEED LEDs lights up when the device
turns on. This also applies if you previously unplugged the power plug from the
mains socket.
d) Setting the air humidity level
18
19
• Press the SETTING button (20) to set the air humidity level within a range of 40 to 80 % and
18
19
in increments of 5 %.
• The desired humidity flashes on the display and the SETTING LED (13) lights up briefly. The
display then shows the current humidity again.
When the current ambient humidity drops below a value of 35 %, the display will
show "35".
When the current ambient humidity exceeds a value of 95 %, the display will show
"95".
e) Using the timer
Programming the power-on time
• The product must be in standby mode to use this function.
• Press the TIMER button (19) to set the time within a range of 1 to 24 hours and in increments
of 1 hour. The LED TIMER (15) lights up. The display will show the set value.
• If you select a value of "10" hours, the product will turn on automatically after 10 hours.
• To disable the automatic power-up feature, first turn on the product either via the POWER
button or by setting the timer to "00".
Programming the power-off time
• In order to use this function, the product must be switched on.
• Press the TIMER button to set the time within a range of 1 to 24 hours and in increments of
1 hour. The LED TIMER lights up. The display will show the set value.
• If you select a value of "10" hours, the product will turn off automatically after 10 hours.
• To disable the automatic power-down feature, first turn on standby mode either via the
POWER button or by setting the timer to "00".
The programmed time is kept in case operation is interrupted via the automatic
defrost feature or a full water tank.
17
16
15
14
SPEED
SPEED
18
19
18
19
Function
Full water tank warning
On/off switch
Setting the desired air humidity level
14
13
Programming the power-on or power-off time
15
14
Setting the fan speed
20
19
20
13
12
14
13
12
20
21
20
21
13
20
21
20
12
11
13
12
21
21
11
11
Werbung
Inhaltsverzeichnis
