Using - Westfalia 82 86 28 Bedienungsanleitung

Using

1. Install the desired brush attachment on the brush holder (4). Turn the attach-
ment a quarter turn clockwise to lock it in its position. Do not use force.
2. Remove the battery compartment cap (1) from
the housing of the power cleaning brush and
open the battery compartment. Insert the
battery (5), as pictured, into the battery com-
partment and close the battery compartment
with the cap.
3. Press the On/Off Switch to start the cleaning
brush.
Note:
Do not use the power cleaning brush on loose or thin cement as this could cause
damage. Take particular care when using the hard brush attachment. Test the
brush on an inconspicuous area before use to avoid scratches.
Operation
13